Page 2
PART LIST Top Panel Circle Frame Bottom Frame 1 PC 4 PCS 1 PC 1 PC HARDWARE LIST 1/4' x 1/2"L 1/4' x 1"L Bolt Long Bolt Washer Allen Wrench 12 PCS (Extra 1) 4 PCS (Extra 1) 16 PCS (Extra 1) 1 PC...
Page 3
Step 1. Carefully lay top panel (part A) upside down on a soft flat surface, such as carpet,as shown below. Attach legs (part B) to top panel (part A) using bolts (part #1), washers (part #3) and allen wrench (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled.
Page 4
Step 3. Attach bottom frame (part D) to legs (part B) using bolts (part #1), washers (part #3) and allen wrench (part #4). NOTE: Please fully tighten all bolts at this time. NOTE: It is important to adjust levelers once fully assembled and upright. Extend adjustable leveler until it's firmly in contact with the floor.