Scanning From The Copier With Scanner Mode - Fiery KM-C2030 Printing Manual

6
6-2 Scanning
• Scan to Internet FAX
• WebScan for mailbox retrieval using Fiery WebTools

Scanning from the copier with Scanner Mode

With Scanner Mode, you can scan an image from the copier glass or Automatic
Document Feeder to the Fiery X3e, then open the image with WebScan or Fiery
Remote Scan. You can then send the scan to a hard disk drive using a mailbox, an
e-mail address, Internet fax, or FTP site.
Scan from Scanner Mode in one of the following ways. Manually scan using Direct
scanning, or scan using pre-programmed directory name tabs and keys (One-Touch)
set up with the Scan tab on the Fiery X3e home page. You must set up One-Touch or
Temporary Registration keys.
To configure Scan tab in the Fiery X3e home page, see the documentation that
N :
OTE
came with the Interface kit.
T
O MANUALLY SCAN A DOCUMENT
1. Place the original face down on the copier glass or face up in the Automatic Document
Feeder.
When scanning transparencies on the copier glass, place a blank white page the
N :
OTE
same size as the original over the transparency.