Cleaning Paper Jam - Kyocera Mita FS-1800N+ User Manual

Cleaning Paper Jam

If the printer's message display shows Paper jam or Add paper (even
though the feeder has paper loaded inside), detach the paper feeder
from the printer by sliding with the rail away from the printer, holding
the bulk paper feeder by both hands as shown below.
If paper is partially fed out from the feeder's output slot, pull the paper
out by hand as shown.
When paper is protruding from the feeder's output
slot, always remove it by pulling the paper in its
normal direction of travel. Never pull paper
backwards.
If paper is not stuck at the feeder's output slot, open the feeder cover
and pull the paper in the feeder.
If no paper is found jammed inside the paper feeder, slide the bulk
paper feeder away from the printer, and check if paper is jammed
inside the printer.
pf8-Eng.pm6 13
Jammed Paper
13
12/19/00, 8:22 PM