Table of Contents
Advertisement
3.4.1.4 PEG Port Configuration Submenu
PEG 0:1:0
Enable Root Port
Enable or Disable the Root Port.
Auto / Disabled / Enabled
Max Link Speed
Configure PEG 0:1:0 Max Speed.
Auto / Gen1 / Gen2 / Gen3
Max Link Width
Force PEG link to retrain to x1/2/4/8.
Auto / Force x1 / Force x2 / Force x4 / Force x8
ASPM
Control ASPM support for the PEG 0. This has no effect if PEG is not the currently
active device.
Disabled / Auto / ASPM L0s / ASPM L1 / ASPM L0sL1
95
http://www.tyan.com
Advertisement
Table of Contents
