Gigabyte GA-Z170X-Designare User Manual page 75

Step 3:
Press <Enter> under the Select Disks item. In the SELECT DISKS box, press <Tab> on the hard drive you want
to use for the master drive and press <Space> on the hard drive you want to use for the recovery drive. (Make sure
the recovery drive has equal or larger capacity than the master drive.) Then press <Enter> to confirm (Figure 17).
Intel(R) Rapid Storage Technology - Option ROM - 14.5.0.2241
ID Drive Model
M1 Hitachi HDS72105
R2 Hitachi HDS72105
Select 1 Master and 1 Recovery disk to create volume.
[hi]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done
[hi]-Change
Step 4:
Under Sync, select Continuous or On Request (Figure 18). When set to Continuous, changes made to the
data on the master drive will be automatically and continuously copied to the recovery drive when both hard
drives are installed in the system. On Request allows users to update data from the master drive to the recovery
Rapid Storage Technology utility in the operating system. On Request also allows
drive manually using the Intel
®
users to restore the master drive to a previous state.
Intel(R) Rapid Storage Technology - Option ROM - 14.5.0.2241
[hi]-Change
Step 5:
Finally press <Enter> on the Create Volume item to begin creating the Recovery Volume and follow the on-
screen instructions to complete.
Copyright (C) Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name : Volume0
RAID Level : Recovery
Disks : Select Disks
[ SELECT DISKS ]
Strip Size : 128KB
Capacity : 223.6 GB
Serial #
Create Volume
JP1532ER04EJTK
JP1532ER046AGK
[ HELP ]
Choose the RAID level:
RAID0: Stripes data (performance).
RAID1: Mirrors data (redundancy).
Recovery: Copies data between a master and a recovery disk.
RAID10: Mirrors data and stripes the mirror.
RAID5: Stripes data and parity.
[TAB]-Next [ESC]-Previous Menu
Figure 17
Copyright (C) Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name : Volume0
RAID Level : Recovery
Disks : Select Disks
Strip Size : N/A
Capacity : 0.0 GB
Sync : Continuous
Create Volume
[ HELP ]
Select a sync option:
On Request: volume is updated manually
Continuous: volume is updated automatically
[TAB]-Next [ESC]-Previous Menu
Figure 18
- 75 -
Size Status
465.7GB Non-RAID Disk
465.7GB Non-RAID Disk
[ENTER]-Select
[ENTER]-Select
Configuring a RAID Set