Changing The Backlight Settings - Kyocera Taho User Manual

Changing the Backlight Settings

Select how long the display screen remains backlit
after any keypress is made. You can also change the
backlight settings for a Java application that is running
in the foreground.
To change the main screen backlight setting:
1.
Press
> Settings > Display > Backlight
2.
Select
Backlight Dim
If you select
Backlight Dim
, or a preset length of time to elapse
Always Dim
before the screen backlight dims.
If you select
Backlight Off
time to elapse before the screen and keypad
backlights turn off. (When you select
for the
Backlight Dim
backlight will turn off after about one minute.)
Note: Long backlight settings reduce the battery's talk and
standby times.
To change a Java application backlight:
Press
> Settings > Display > Backlight >
Java Backlight > Default
32 2B. Settings
.
or .
Backlight Off
, select
Always Bright
, select a preset length of
Always Bright
setting above, the keypad
or .
Continuous
Setting the Notification Pop-up
This option allows you to enable or disable notification
pop-up when you receive a new notification (except for
incoming call and alarm).
1.
Press
> Settings > Display > Notification
2.
Select
Enable pop-up
Tip:
If you select
notification icon. (The notification pop-up will not appear
while an application is running.)
,
Selecting a Picture ID
You can select an image as a picture ID.
1.
Press
> Settings > Display > Picture ID
2. Select
Contact
Private / Unknown
3.
Select a picture ID option and press
4.
Select an image and press
or
Disable pop-up
Disable pop-up , you will see only a
, , or
Unsaved Numbers
.
to assign it.
.
.
.
.