Timer; Stopwatch; World Clock - Kyocera Mako User Manual

The chosen operation is highlighted.
4. Enter the second number. Press the
key to perform the operation. The result
is shown.
5. Select to return to menu or
Exit
one of the following:
adds displayed result to the value
–
M+
stored in memory.
– displays currently stored value on
MR
the screen.
– clears value currently stored
MC
in memory.

Timer

The Timer counts down for the specified time,
and beeps when that amount of time has elapsed.
1. Select >
Menu Tools
2. At the Set Timer, enter the time length.
– Scroll left or right to move between the
hours, minutes and seconds fields.
– Scroll up or down to change the hours,
minutes and seconds.
3. If needed, select
sounds to change the sound.
4. To work the timer, select the
following options:
– begins the countdown.
Start
– pauses the countdown.
Stop
– clears the timer.
Reset
User Guide
OK
Options
> > .
Timer Set
and one of the
Sound
When the countdown is complete, select
silence the alarm.

Stopwatch

The Stopwatch counts time for you.
and
1. Select
Menu
2. To work the stopwatch, select the
following options:
–
Start
–
Stop
–
Reset
Press the
Back

World clock

The world clock enables you to check times
in cities around the world in relation to your
local time.
Note: You need digital service to use this feature.
Set the world clock
1. Select
Menu
The world clock menu displays your local
date and time on the first line.
2. Scroll left or right to select a different time
zone, or up and down to view other cities on
the same time zone.
> >
Tools Stopwatch
begins counting.
pauses counting.
clears the stopwatch.
key to return to the menu.
> >
Tools World Clock
to
Off
.
.
55