Advertisement
Quick Links
B601 Installation
B700 Hybrid Telephony Card
View Datasheet
Installation Manual
Overview
Hardware Installation
E1/T1 Pinouts
RJ45 T1/E1 Pinouts
Analog Pinouts
Software Installation
Overview
1 port of
T1 E1
/
/J1, 4 ports of
Single FXS port designed for optimum fax support
Supports
Asterisk
Line Protocol Support: Voice CAS,
uses Wanpipe Driver which includes a suite of configuration, operation and debugging utilities
Hardware Installation
Compatibility Note
Sangoma Telephony cards are designed to be compatible with most commercially available motherboards.
PCI details
Autosense compatibility with 5 V and 3.3 V PCI buses
Maximum operational power for PCI: 3 W (0.6 A @ 5 V) For PCI Express: 2.5 W (0.76 A @ 3.3 V)
PCI-Express details
1 Lane PCI Express bus
Compatible with 4x, 8x and 16x slots
Faceplate
FXO
and 1 Port of FXS
®
™
,
FreeSwitch
as well as other Open Source and proprietary
MFC R2 PRI ATM Frame Relay X.25
/
,
,
,
,
, HDLC,
PBX
, Switch,
IVR
, and VoIP
PPP SS7
,
, Transparent bit-stream, BSC
gateway
applications
Advertisement
Related Manuals for Sangoma B601
Summary of Contents for Sangoma B601
- Page 1 Wanpipe Driver which includes a suite of configuration, operation and debugging utilities Hardware Installation Compatibility Note Sangoma Telephony cards are designed to be compatible with most commercially available motherboards. PCI details Autosense compatibility with 5 V and 3.3 V PCI buses Maximum operational power for PCI: 3 W (0.6 A @ 5 V) For PCI Express: 2.5 W (0.76 A @ 3.3 V)
- Page 2 Hardware Configuration The B601 has 3 RJ11 connectors for FXO/FXS, and 1 RJ45 for T1/E1/J1. There are two lines in each RJ11 connector, only 1 for the FXS port. The first line is on the inner pair and the second line is on the outer pair (inner pair for FXS port).
- Page 3 RTIP TTIP Analog Pinouts Software Installation Select your Installation type: Install with FreePBX Distro Install with your own Asterisk server Install with FreeSWITCH Install with API...