Electrical Requirements - KitchenAid 5KSMC895Z Instructions Manual

STAND MIXER SAFETY
6. Do not operate Stand Mixer with a damaged cord
or plug or after the Stand Mixer malfunctions, or
is dropped or damaged in any manner. Return
appliance to the nearest Authorized Service Center
for examination, repair, or electrical or mechanical
adjustment.
7. The use of attachments not recommended or sold by
KitchenAid may cause fire, electrical shock, or injury.
8. Do not use the Stand Mixer outdoors.
9. Do not let cord hang over edge of table or counter.
10. Remove flat beater, wire whip, or dough hook from
Stand Mixer before washing.
SAVE THESE INSTRUCTIONS
This product is designed for commercial use

Electrical requirements

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
The acoustic pressure level measured in conformity with the prEN 454-test code
is less than 70 dBA.
A * in the model number indicates additional characters that designate machine color
and engineering digits for the actual model (eg. 5KSMC895*).
4
W10878937B_ENv05.indd 4
Volts: 220-240 A.C.
Hertz: 50-60 Hz
Power: 325 W
Recommended operating time:
1-30 minutes with a duty cycle of 10-min.
ON/ 15 min. OFF .
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet
near the appliance.
The wattage rating is determined by using
the attachment that draws the greatest load
(power). Other recommended attachments
may draw significantly less power.
This product is supplied with a Y-type power
cord. If the power cord is damaged, it must
be replaced by the manufacturer or a service
agent in order to avoid a hazard.
P
7/27/17 8:17 AM