Advertisement
Quick Links
EXTENSION BLASTER
1. Load dart into lower muzzle.
CLEARING A JAM
1. Pull Bolt Mechanism back. If Bolt
Mechanism seems stuck, try pulling
the trigger first.
3. Open the Jam Clearing Door and
remove the jammed dart. Close door.
© 2006 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
U.S.Patent Nos. 6083127, 5529050 and Patent Pending.
61983
P/N 6594260000
Get user manuals:
See SafeManuals.com
2. Slide the Cocking Mechanism
backwards.
3. Pull the Trigger 1 to launch 1
STREAMLINE DART
™
2. Remove the Clip before attempting to
remove the jammed dart.
4. Replace Clip and slide Bolt Mechanism
forward. This should load another dart.
Product and colors may vary.
61983
Thank you for purchasing the NERF
blaster. Be sure to read and follow all instructions carefully before
.
using this product.
Use both blasters separately or snap them together to create the
N-Strike LONGSHOT CS-6.
CAUTION:
TO AVOID INJURY:
N-STRIKE LONGSHOT CS-6
Dart's Holding Tube
Cocking
Mechanism
Questions? Call: 1-800-327-8264
™
N-Strike LongShot CS-6
™
Do not aim at eyes or face.
Use only darts designed for this product.
Do not modify darts or dart blasters.
™
WITH 12 STREAMLINE DARTS
Jam
Clearing
Door
Clip Lock Button
Clip
Trigger 2
Bolt Mechanism
Trigger 1
Bipod
AGES 6+
N-Strike
LongShot CS-6
™
™
™
™
Ready Indicator
Sight
Clip Storage
Advertisement
Related Manuals for Hasbro NERF N-Strike LongShot CS-6
Summary of Contents for Hasbro NERF N-Strike LongShot CS-6
- Page 1 This should load another dart. Clip Cocking Trigger 2 Mechanism Bolt Mechanism Trigger 1 © 2006 Hasbro. All Rights Reserved. Clip Storage TM & ® denote U.S. Trademarks. Bipod U.S.Patent Nos. 6083127, 5529050 and Patent Pending. 61983 P/N 6594260000 Product and colors may vary.
- Page 2 N-Strike LONGSHOT CS-6 To Assemble: ™ 1. Insert Bolt into mechanism as shown 2. Stock extends. and plug onto other end of bolt. 1. Pull Bolt Mechanism back. Ready Indicator should change from black to red. Slide Clip into place. 3.