Acer XV282K User Manual page 28

---------------------------------------------------------------------------------------------------------
Note:
OSD Locked:
•
•
•
•
OSD Unlocked:
•
•
•
System
Mode - Standard
Picture
Input
Color
Auto Source
Wide Mode
Audio
Hot Key Assignment
Performance
DDC/CI
OSD
ProxiSense
System
Rest Reminder
HDMI Black Level
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to to the function you
3. Toggle to the left or right to control functions.
4. Input: Select the source from HDMI1(2.1), HDMI2(2.1), DP,
5. Auto Source: The default is "On", which can support auto search for signal source in
order.
-----------------------------------------------------------------------------------------------------------
Note: Surround application must set Auto Source is "Off".
6. Wide mode: You can select which screen aspect you are using. The options are
Aspect, Full, 1:1 and 21:9.
7. Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness,
Gamma, Contrast,
Volume, Brightness, Gamma, Contrast,
8. DDC/CI: Allows the monitor settings to be set through the software on the PC.
Set the OSD Lock to "On" by the OSD option and press "Enter" to
execute the All Key lock function.
The "OSD Locked" message will be displayed in the middle of the
screen.
LED lights will be changed from
Press any Key screen to prompt "OSD Locked" message.
In normal display condition to press the "Navi Key" in the middle of
more than 3 seconds to trigger "OSD Unlock".
The "OSD Unlock" message will be displayed in the middle of the
screen.
LED lights will be restored to
HDMI（2.1）
On
Full
On
Off
Off
Normal
wish to adjust and press the joystick to enter it.
Low Blue Light, Over Drive, VRB) and shortcut keys 2 (Modes,
Low Blue
Low Blue Light
Low Blue Light.
X
DP ALT.
Light, Over Drive, VRB).
to orange light.