Table of Contents
Advertisement
S27A60* / S27A60*U / S32A60* / S32A60*U
3
Push the assembled stand into the main body in the direction of the
arrow as shown in the figure.
1
Put the stand base onto the stand neck
as the direction shown in the figure.
Check that the stand neck is firmly
connected.
4
Stand up the monitor as shown in the
figure.
2
Tightly fasten the connecting screw at
the bottom of the stand base. Fasten the
large screw in the middle for assembly.
5
After installing the stand, place the
product upright.
Caution
Do not arbitrarily remove the panel film.
If not observed, the warranty service may
be restricted.
10
Advertisement
Table of Contents
