Table of Contents
Advertisement
13
Select OK to test the connection.
When a prompt is displayed stating
that the test was successful, press
MENU/OK.
N •
This step will be skipped if the fi le
transmitter is not currently attached
to the camera.
•
If the test ends in failure, check the
1
communication setting profi le and
network settings.
14
Choose SELECT to fi nish creating the
connection setting profi le.
N
The connection setting profi le can
also be selected later using SELECT
CONNECTION SETTING.
15
Upload pictures to the FTP server (P 42).
Connecting via Wired LAN (Ethernet)
Connect to an FTP server via wired LAN (Ethernet).
1
Connect to the wired LAN by plugging an Ethernet cable into
the fi le transmitter's LAN connector.
2
Select CREATE/EDIT CONNECTION SETTING > CREATE
USING WIZARD in the network/USB setting menu and
choose FTP TRANSFER.
3
Select CREATE NEW.
N
Choose SELECT FROM LIST to select
from a list of existing connection set-
ting profi les.
32
TEST THE CONNECTION?
OK
NO
SETTING COMPLETE
PLEASE SELECT CREATED SETTING
FROM "SELECT CONNECTION SETTING"
SELECT
SKIP
FTP TRANSFER
CREATE NEW
SELECT FROM LIST
CREATE NEW CONNECTION SETTING
USING WIZARD
Advertisement
Table of Contents
