Aux Output (2 Channels; Bluetooth Section - JBL PARTY BOX 100 Service Manual

Frequency Response (Output Power and
THD+N) with EQ setting
THD+N at 1W(at 1kHz)
THD+N at Rated Output Power(at 1kHz)
Signal-to-Noise ratio at Rated Output
Power(at 1kHz)
Input Impedance
Residual Noise

4.1.4 Aux Output (2 channels)

ADC/DAC/DSP should work with not less than 44.1kHz/24bit format
Description
Voltage Gain
Minimum Required Output Voltage before
clipping (10Hz-22 KHz BW)
Frequency Response
THD+N at 0.5V output (10Hz-22 KHz BW)
THD+N at 200 mV output (10Hz-22 KHz BW)
S/N Ratio, 'A Weighted', (10 Hz-22 KHz BW)

4.2 Bluetooth Section

4.2.1 General
Description
Bluetooth Standard
Frequency Band
Host Interface
Profile Supported
Audio Codec
Data Rate
TBD
<0.5 % TBD
<1% TBD
60dB (A-Weighted)
>10Kohm for MIC
>20Kohm for Guitar
8mV rms
Specification
Type: 1V, Limit: 0.9V.
20Hz - 19KHz,Type: <= (+/- 0.5dB), Limit: <= (
Type >90dB, Limit>80dB
Specification
Version 3.0 + EDR,BLE
2.402 – 2.480 GHz
UART
SPP (Serial Port Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
SBC (Subband Codec)
2.1Mbps (over the air)
-0.2dB~ -0.8dB
+/-
1dB).
<1%(20 Hz)
<0.2%(1 kHz)
<0.2%(20 kHz)
<1%(20 Hz)
<0.2%(1 kHz)
<0.2%(20 kHz)