Product Registration - Frigidaire FGID2476SF1A Use & Care Manual

Thank you for choosing Frigidaire
This Use & Care Guide is part of our commitment
to customer satisfaction and product quality
throughout the service life of your new appliance.
We view your purchase as the beginning of a
relationship. To ensure our ability to continue
serving you, please use this page to record
important product information.
_________________________________
Purchase Date
_________________________________
Model Number
_________________________________
Serial Number
Registering your product with Frigidaire enhances
our ability to serve you. You can register online
at www.frigidaire.com or by dropping your
Product Registration Card in the mail.

NOTE
Not all cycles and options available on all
models.

NOTE
Why Energy Efficient Units run long cycles:
Several factors are important to washing
dishware. The energy use of the dishwasher
was reduced by applying more of the factors
that don't use so much energy and less of the
ones that use more. As a result, you will see
that the wash cycles take longer.
CAUTION
Property Damage Hazard
Before starting dishwasher be sure that the
water is connected and turned on. Failure to
do so may cause damage to the pump seal and
result in water leakage.

PRODUCT REGISTRATION


NOTE
Very Important Information
Read Before Operating Your Dishwasher!
Normal Operating Sounds
This dishwasher does not sound like most
dishwashers - IT'S QUIETER.
Your Direct Feed Wash System dishwasher uses
energy efficient motors for the wash and drain
portions of the cycle you select. Each cycle has
a series of water fills and drains for washing
and rinsing dishes. As each cycle begins, you
may-or may not- hear the drain motor. The next
sound you will hear is the splashing water as it
enters the tub.
PLEASE BE ADVISED: If you compare this
dishwasher to previous models, you may be
surprised at what you DON'T hear.
Getting Started
1. Load Dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
5. Select desired CYCLE (See Cycle Chart).
6. Select desired OPTION (See Option
Selections).
7. To start, press START/CANCEL and close door
immediately.

NOTE
The dishwasher is programmed to remember
your last cycle so you do not have to reset each
time. To start the dishwasher using the same
cycle and options selected on the previous
wash, just press the START/CANCEL pad.
3