Installation - Husky H4440 Use And Care Manual

Installation

1
Cleaning the air hose
□ A 3/8" air hose is required, with a maximum length of 25 ft.
□ Clean the air hose of accumulated dust and moisture
before connecting it to the air supply.
NOTE: If a longer air hose is required, connect a 1/2" air
hose to the 3/8" air hose to ensure the impact wrench has
the necessary air supply.
2
Connecting to the air supply
□ Always use clean dry air. Excessive moisture and dirt will
greatly reduce the life of any air motor. We recommend the
installation of an in-line filter-regulator-lubricator as close
to the tool as possible.
□ Ensure all hoses and fittings are the correct size and
secured tightly.
Recommended Air Line Set-Up
Part Description
A 1/2" Impact Wrench
B Quick Plug
C Quick Coupler
D Air Hose
E In-line Regulator
F In-line Lubricator
G In-line Filter
H Air Compressor
5
Please contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM