Table of Contents
Advertisement
SETTINGS
SELECTING A DECT BASE STATION
Use this option to choose one of the registered base stations. You can also let
Konftel 200W automatically select the base station with the strongest signal. See
page 6 for instructions on how to register with a new base station.
Base
Base 1
Auto✓
Search
Done
16
Press the MENU key.
Select "Tools" using the Up/down key.
Press OK.
Select the menu Base using the Up/downkey.
Press OK.
The current base station (e.g. Base 1) is shown in
the display.
Look through the registered base stations and the
option Auto using the Up/down key.
Auto will automatically select the base station with
the strongest signal. The chosen option is marked
with a tick.
Press OK.
The conference unit will now search for the selected
base station. Wait for confirmation.
If the base station is found, the word Done will ap-
pear in the display. If the base station is not found,
the word Fail will appear instead. Select another
base station if that is the case, or check that the
base station you wanted actually is connected and
within range.
Press OK.
Advertisement
Table of Contents
