1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Smart TV
  5. T28E310LT
  6. E-manual

Samsung T28E310LT E-Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E-MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Samsung T28E310LT

Summary of Contents for Samsung T28E310LT

  • Page 1 E-MANUAL...

  • Page 2: Table Of Contents

    Other Features Calibrating the Screen Display Changing the Picture Options Viewing the e-Manual Changing the Preset Sound Modes Using the Self Diagnosis Adjusting Sound Settings Updating the Software Changing the Use Mode Preference Features Viewing the Contact Samsung Executing initial setup...

  • Page 3: Using The Info Button (Now & Next Guide)

    ❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV program information for each channel according to the broadcasting time. When you press the INFO button, a channel information banner will appear on the top of the screen.

  • Page 4: Memorizing Channels

    ❑ Memorizing channels Your TV memorizes channels and adds the memorized channels to the Channel List with the Auto Tuning function. Before your TV can memorize channels, you must specify the signal source Both, Air, or Cable. ◀ ▶...
  • Page 5 Auto Tuning ■ O MENUm → → → ENTERE Broadcasting Auto Tuning Scans for channels automatically and stores them in the TV’s memory. To start Auto Tuning, follow these steps: 1 Select Auto Tuning, and then press ENTERE. 2. Press the button to select Start.
  • Page 6 4. Select Scan, and then press ENTERE. Auto Tuning starts. After all the available channels are stored, removes scrambled Auto Tuning channels. When done, the Auto Tuning menu then reappears. This process can take up to 30 minutes. Automatically allocated program numbers may not correspond to actual or desired program numbers.
  • Page 7 How to Stop Auto Tuning 1. Press the button to select Stop. ENTERE 2. A message will ask Stop Auto Tuning?. Select by pressing the button. 3. Press the ENTERE button. When you select Change Settings, antenna setting screen appears. You can set antenna settings and start channel search again.
  • Page 8 Antenna ■ O MENUm → → → ENTERE Broadcasting Antenna To begin the memorizing procedure, follow these steps: 1. Select Antenna, and then press ENTERE. 2. Select the source of your TV signal, or Cable. Selecting also changes the actual signal input from Cable Cable to Air.

  • Page 9: Using The Channel Menu

    ❑ Using the Channel menu Channel List ■ O MENUm → → → ENTERE Broadcasting Channel List Channel List contains the channels your TV displays (added channels) when you press the channel button. You can view channel information, Added Ch., Edit Favorites, Favorites 1...
  • Page 10 Mode ● Antenna: Switch between and Cable. ● Edit Favorites: Set channels you watch frequently as favorites. Add or delete the selected channel in Favorites 1 Favorites For detailed information about using Edit Favorites, refer to “Edit Favorites”. ● Favorites 1 Favorites 5: Show all favorite channels, arranged in up to five groups.
  • Page 11 Guide ■ → → → N MENUm Broadcasting Guide ENTERE The EPG (Electronic Program Guide) information is provided by broadcasters. Using program schedules provided by broadcasters, you can specify programs you want to watch in advance so that the channel automatically changes to the selected program channel at the specified time.
  • Page 12 Schedule Manager ■ O MENUm → → → ENTERE Broadcasting Schedule Manager You can set a desired channel to be displayed automatically at the intended time. In addition, you can view, modify or delete a channel you have reserved to watch. →...
  • Page 13 ● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday. If you select Manual, you can set the day you want. A check (c) mark indicates a day you selected. ● Date: You can set a desired date. Date is available only when you select Once in Repeat.
  • Page 14 Edit Channel ■ O MENUm → → → ENTERE Broadcasting Edit Channel You can add or delete channels. Deleting a channel from the channel list 1. Go to screen. Edit Channel 2. Press the buttons to select the desired channel, and then press ◀...
  • Page 15 Adding a channel to the channel list 1. On the screen, press the TOOLS button, and then select the Edit Channel Category. 2. Select and press the button. A deleted channel appears in channel list. Your TV will display all channels, including channels you deleted from the channel list, on the All.
  • Page 16 Using the colored and function buttons with the Edit Channel. ● Green (Delete / Add) – Delete: Deletes a channel from the channel list. – Add: Adds a deleted channel. It only appears when you select the deleted channel in All. ●...
  • Page 17 ● Ÿ To): Goes to channel directly by pressing numbers (0~9). ● k (Page): Moves to next or previous page. ● T (Tools): Displays the option menu. The option menu items that appear may differ depending on the channel status and type. –...
  • Page 18 Edit Favorites ■ O MENUm → → → ENTERE Broadcasting Edit Favorites You can add, edit or delete favorite channels. Adding a channel to the Favorites 1 Favorites 5 1. Go to screen. Edit Favorites 2. Press the buttons to select the desired channel, and then press ◀...
  • Page 19 Deleting a channel from the Favorites 1 Favorites 5 1. On the screen, select the favorite list using (Change Edit Favorites Fav.) button. 2. Move to favorite list, and then select the desired channel you want to delete. 3. Press the (Delete) button.
  • Page 20 Using the colored and function buttons with the Edit Favorites. ● (Category Change order) – Category: Changes the channel mode to Added Ch., Recently The selected channel mode is Viewed, Mostly Viewed, All, TV, Analog displayed. – Change order:change the favorite channel order. ●...
  • Page 21 ● Ÿ To): Goes to channel directly by pressing numbers (0~9). ● k (Page): Moves to next or previous page. ● T (Tools): Displays the option menu. The option menu items that appear may differ depending on the channel status and type. –...

  • Page 22: Blocking Programs

    ❑ Blocking Programs Channel Lock ■ → → → O MENUm Broadcasting Channel Lock ENTERE Lock channels to prevent unauthorized users, such as children, from watching unsuitable program. The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0- 0-0-0”.

  • Page 23: Other Features

    ❑ Other Features Channel Settings ■ O MENUm → → → ENTERE Broadcasting Channel Settings ● Fine Tune (analog channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak ◀...
  • Page 24 ● Color System (analog channels only) Normally the TV can receive image and sound with good quality in Auto mode. This mode detects the color signal sources automatically. If the color implementation is unsatisfactory, select any of PAL-M, PAL-N or NTSC. ●...
  • Page 25 Subtitle (digital channels only) ■ O MENUm → → → ENTERE Broadcasting Subtitle Use this menu to set the Subtitle mode. ● Subtitle: Switches subtitles on or off. ● Subtitle Mode: Sets the subtitle mode. If the program you are watching does not support the Hearing Impaired function, automatically activates even if the...
  • Page 26 The available language may differ depending on the broadcast. English is the default in cases where the selected language is unavailable in the broadcast. ● Primary Subtitle: Sets the primary subtitle. ● Secondary Subtitle: Sets the secondary subtitle. ◀ ▶...
  • Page 27 Caption (analog channels only) ■ (On-Screen Text Messages) O MENUm → → → ENTERE Broadcasting Caption ● Caption: You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. The Caption feature does not work with devices connected to the TV through the Component, HDMI input jacks.
  • Page 28 Audio Options ■ O MENUm → → → ENTERE Broadcasting Audio Options ● Audio Language (digital channels only) Change the default value for audio languages. The available language may differ depending on the broadcast. ◀ ▶...
  • Page 29 ● Multi-Track Sound (analog channels only) Select an option using the buttons, and then press ENTERE. Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. Stereo: Choose for channels that are broadcasting in stereo. SAP: Choose to listen to the Separate Audio Program, which is usually a ◀...
  • Page 30 ● Audio Format (digital channels only) Select the audio format of current broadcasting. The available items may differ depending on the broadcasting status. ◀ ▶...

  • Page 31: Changing The Preset Picture Mode

    ❑ Changing the Preset Picture Mode Picture Mode ■ O MENUm → → → ENTERE Picture Picture Mode Picture modes apply preset adjustments to the picture. Select a mode using the buttons, and then press ENTERE. When connecting a PC, you can only select Entertain and Standard.
  • Page 32 ● Dynamic: Suitable for a bright room. ● Standard: Suitable for a normal environment. ● Movie: Suitable for watching movies in a dark room. ● Entertain: Suitable for watching movies and games. It is only available when connecting a PC. ◀...

  • Page 33: Adjusting Picture Settings

    ❑ Adjusting Picture Settings Backlight Contrast Brightness Sharpness Color Tint (G/R) ■ O MENUm → → → ENTERE Picture Backlight Your television has several options for adjusting picture quality. Select an option using the buttons, and then press ENTERE. u/d/l/r NOTE ●...
  • Page 34 Picture Size ■ O MENUm → → → ENTERE Picture Picture Size Picture Size provides various picture size and aspect ratio options. Select an option using the buttons, and then press ENTERE. u/d/l/r ● Picture Size: If you have a cable box or satellite receiver, it may have its own set of screen sizes as well.
  • Page 35 16:9: Sets the picture to 16:9 wide screen mode. Wide Zoom: Magnifies the picture size more than 4:3. A magnified picture can be moved up and down. Zoom: Magnifies the picture moderately. Cuts off the top and sides. 4:3: Sets the picture to mode.
  • Page 36 ● Position: Adjusts the picture position. Position is only available if Picture Size is set to Wide Zoom. To use the Position function after selecting Wide Zoom, follow these steps: 1. Select the Position, and then press the ENTERE button. 2.
  • Page 37 To use the Position function after selecting Screen Fit when connected to an HDMI (1080i/1080p) or Component (1080i/1080p) source, follow these steps: 1. Select the Position, and then press the ENTERE button. 2. Select the Position button, and then press ENTERE button.
  • Page 38 HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) You can adjust and store settings for each external device you have connected to an input on the TV. Picture Sizes available by Input Source: Input Source Picture Size ATV, AV, Component (480i, 480p) 16:9, Wide Zoom, Zoom, 4:3, Custom DTV(1080i), Component (1080i, 1080p), 16:9, Wide Zoom, Zoom, 4:3, Screen Fit,...

  • Page 39: Calibrating The Screen Display

    ▶ However, the same basic information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click “Control Panel” on the Windows start menu. 2. Click “Appearance and Themes” in the “Control Panel” window. A display...
  • Page 40 3. Click “Display”. Another display dialog box appears. 4. Click the “Settings” tab on the display dialog box. – On the Settings tab, set the correct resolution (screen size). The optimal resolution for this product is 1366 x 768. – If a vertical-frequency option exists on your display settings dialog box, select “60”...
  • Page 41 ■ O MENUm → → → ENTERE Picture View two sources on the TV at the same time. NOTE ● For PIP sound, refer to the Sound Select instructions. ● If you turn the TV off while watching in the PIP mode, the PIP function is reset to off.
  • Page 42 ● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. ● The sub-picture size can be set by three modes. – minimum – medium –...
  • Page 43 ● PIP Settings Main picture Sub picture TV, AV, Component, HDMI1, HDMI2/DVI TV, AV, Component, HDMI1, HDMI2/DVI main screen Component HDMI1 HDMI2/DVI sub picture Component ◀ ▶ HDMI1 HDMI2/DVI O: Available / X: Not Available...
  • Page 44 ● PIP (Off / On): Activate or deactivate the function. ● Source: Select your desired source. ● Antenna: Select either Cable as the input source for the sub- screen. ● Channel: Select the channel for the sub-screen. ● Size: Select a size for the sub-picture. ●...

  • Page 45: Changing The Picture Options

    ❑ Changing the Picture Options Advanced Settings ■ O MENUm → → → ENTERE Picture Advanced Settings Advanced Settings are available in the Standard Movie modes. To use, select an option using the buttons, and then press ENTERE. u/d/l/r When connecting a PC, you can only make changes to the White Balance Gamma.
  • Page 46 ● RGB Only Mode (Off/Red/Green/Blue): Displays the Red, Green Blue color for making fine adjustments to hue and saturation. ● Color Space: Adjusts the range of colors (the color gamut) available to create images. Adjust Auto Native to set Color Space.
  • Page 47 ● Gamma: Adjusts the primary color intensity. ● Lighting: Reduces power consumption by reducing screen brightness Motion when the picture on the screen is motionless. When you change the Backlight, Contrast, or Brightness, the TV sets Motion Lighting to Off. Only available in Standard mode.
  • Page 48 Picture Options ■ O MENUm → → → ENTERE Picture Picture Options Select an option using the buttons, and then press ENTERE. u/d/l/r When connecting a PC, you can only make changes to Color Tone. ● Color Tone (Cool/Standard/Warm1/Warm2) will be deactivated when the picture mode is Dynamic. Warm1 Warm2 You can adjust and store settings for each external device connected to an...
  • Page 49 ● Digital Clean View (Off/Low/Medium/High/Auto/Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital feature to reduce any static and ghosting that may appear on the Clean View screen. When the signal is weak, try each option until the TV displays best picture. Auto Visualization: When changing analog channels, displays signal strength.
  • Page 50 ● HDMI Black Level: Lets you select the black level on the screen to adjust the screen depth. Available only in HDMI mode (RGB signals). ● Film Mode: Sets the TV so that it senses and then processes film signals from all sources automatically and adjusts the picture for optimum quality.
  • Page 51 Picture Off ■ O MENUm → → → ENTERE Picture Picture Off The screen is turned off but the sound remains on. Press any button (except Power and Volume buttons) on your remote to turn the screen back on. ◀ ▶...
  • Page 52 Reset Picture ■ O MENUm → → → ENTERE Picture Reset Picture Resets your current picture mode to its default settings. ◀ ▶...

  • Page 53: Changing The Preset Sound Modes

    ❑ Changing the Preset Sound Modes Sound Mode ■ O MENUm → → → ENTERE Sound Sound Mode Use the buttons to select an option, and then press ENTERE. Speaker Select is set to External Speaker, Sound Mode is disabled. ●...

  • Page 54: Adjusting Sound Settings

    ❑ Adjusting Sound Settings Sound Effect ■ O MENUm → → → ENTERE Sound Sound Effect (standard sound mode only) Use the buttons to select an option, and then press ENTERE. Speaker Select is set to External Speaker, Sound Effect is disabled.
  • Page 55 ● DTS TruDialog This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. ● Equalizer Equalizer to customize sound setting for each speaker. Balance L/R: Adjusts the balance between the right and left speaker. 100Hz 300Hz 1kHz...
  • Page 56 Speaker Settings ■ O MENUm → → → ENTERE Sound Speaker Settings ● Speaker Select A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
  • Page 57 ● Auto Volume equalizes the volume level on each channel, so that when you change Normal channels, the volume level is the same. Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you may want to keep the volume low.
  • Page 58 Additional Settings ■ O MENUm → → → ENTERE Sound Additional Settings ● DTV Audio Level (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.
  • Page 59 ● Digital Audio Out Digital Audio Out is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format (PCM/Dolby Digital/DTS/DTS Neo 2:5): You can select the Digital Audio output format. The available Digital Audio output format may differ depending on the input source.
  • Page 60 ● Dolby Digital Comp (digital channels only): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). This function is available only when the Audio Format is set to Dolby Digital, Dolby Digital Plus, AAC, or HE-AAC.
  • Page 61 Reset Sound ■ O MENUm → → → ENTERE Sound Reset Sound Reset all sound settings to the factory defaults. Select Reset Sound, press ENTERE, select on the pop-up, and then press ENTERE again. ◀ ▶...

  • Page 62: Executing Initial Setup

    ❑ Executing initial setup Setup ■ O MENUm → → → ENTERE System Setup Configure the channels and the time when setting up the TV for the first time or when resetting the unit. Execute the initial setup following instructions that the TV guides. Enter your 4-digit PIN, the default of which is 0-0-0-0.

  • Page 63: Setting The Time

    ❑ Setting the Time Time ■ O MENUm → → → ENTERE System Time The current time will appear every time you press the INFO button. ● Clock: Set the clock to use the various timer features of the TV. If you disconnect the power cord, you have to set the clock again.
  • Page 64 ● Manual: Set the current time manually. Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Set: Set the and Time. Clock Date Select Clock Set. Select Date or Time, and then press ENTERE.

  • Page 65: Using The Sleep Timer

    ❑ Using the Sleep Timer O MENUm → → → → ENTERE System Time Sleep Timer ● Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). Use the buttons to select a period of time, and then press ENTERE.

  • Page 66: Setting The On/Off Timer

    ❑ Setting the On/Off Timer O MENUm → → → → ENTERE System Time On Timer <or> Off Timer On Timer so that your TV turns on automatically at a time and on a day of your choosing. ● Timer: You can set up three separate configurations.
  • Page 67 Time: Set the hour, minute, am/pm. Use the number buttons or the buttons to enter numbers. Use the buttons to change entry fields. Volume: Set the desired volume level. Use the buttons to change the volume level. Source: Specify which source to dispaly when the TV turns on. The displays an air / cable broadcast.
  • Page 68 The USB option can be selected if a device is connected to the TV. To select a source other than or USB, you must perform the following: ● Connect the cable or satellite set-top box to the AV port. ● Tune the set-top box to the channel you wish to display.
  • Page 69 Antenna (when the Source is set to TV): Select or Cable. Channel (when the Source is set to TV): Select the desired channel. Music Photo (when the Source is set to USB): Select a folder in the USB device containing the music or photo files you want to play when the TV turns on automatically.
  • Page 70 If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not operate correctly. If there is only one photo file in the USB, the Slide Show will not play. A folder with a name that is too long cannot be selected.
  • Page 71 ● Timer: You can set up three separate Off Timer configurations. (Off Timer Off Timer Off Timer You must set the clock before you can use Timer. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want to turn off Off Timer your TV.

  • Page 72: Economical Solutions

    ❑ Economical Solutions Eco Solution ■ O MENUm → → → ENTERE System Eco Solution ● Energy Saving (Off/Low/Medium/High): Lets you adjust the brightness of the TV in order to reduce power consumption. ● No Signal Power Off (Off 15 min. 30 min.

  • Page 73: Other Features

    ❑ Other Features Menu Language ■ O MENUm → → → ENTERE System Menu Language Set the menu language. 1. Select Menu Language, and then press the ENTERE button. 2. Choose a language, and then press the ENTERE button. Choose English, Español, or Português. ◀...
  • Page 74 Auto Protection Time ■ O MENUm → → → ENTERE System Auto Protection Time ● Auto Protection Time (Off/2 hours/4 hours/8 hours/10 hours): Activates the Screen Burn Protection function if a still frame is shown for longer than the specified duration. (Displaying a still frame for longer than 4 hours can burn the screen.) ◀...
  • Page 75 Change PIN ■ O MENUm → → → ENTERE System Change PIN Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits in Confirm New PIN. When the Confirm screen appears, press the Close button.
  • Page 76 General ■ O MENUm → → → ENTERE System General ● Game Mode (Off / On): When you have connected a game console such as PlayStation™ or Xbox™ to the TV, you can enjoy a more realistic gaming experience if you set Game Mode NOTE ●...
  • Page 77 ● Panel Lock: Lock or unlock all the keys on the panel. ● Boot Logo: Display the Samsung logo when the TV is turned on. ◀ ▶ ● AV Color System: Normally the TV can receive image and sound with good quality when in the mode Auto.
  • Page 78 DivX® Video On Demand ■ O MENUm → → → ENTERE System DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file.

  • Page 79: Using The Source List

    ❑ Using the Source List Source List ■ O MENUm → → → ENTERE Applications Source List When you press the SOURCE button, Source screen will be displayed at once. You can only choose external devices that are connected to the TV. In Source, connected inputs are highlighted.

  • Page 80: Connecting A Usb Device

    ❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and movie files to the USB port on the side of the TV. 3. When USB is connected to the TV, popup window appears. You can select the Photos, Videos Music...
  • Page 81 ● MTP (Media Transfer Protocol) is not supported. ● The file system supports NTFS (Read Only), FAT16 and FAT32. ● Certain types of USB Digital camera and audio devices may not be compatible with this TV. ● Media Contents only supports sequential jpeg format. ●...
  • Page 82 ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ● The HDD (Hard Disk Drive) connected to USB is not supported.
  • Page 83 ● MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
  • Page 84 ● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. ● If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.
  • Page 85 Disconnecting a USB Device 1. Press the SOURCE button. 2. Select a desired USB device, and then press the TOOLS button. The Tools menu appears. 3. Select Remove USB, and then wait until the selected USB device is disconnected. You can remove a USB device from the TV. To remove a USB device from the TV, we recommend use Remove USB function.

  • Page 86: Using The Media Contents

    ❑ Using the Media Contents O MENUm → → → ENTERE Applications Media Play Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device. 1. Press the MEDIA.P button. 2. Press button to select desired menu, then press the ENTERE button.
  • Page 87 Playing the selected files 1. Press the button to select at the top of each main screen and Options select Play Selected. 2. Select the desired files. The check box appears to the left of the selected files. Press ENTERE button again to deselect the file.

  • Page 88: Playing The Photos / Videos / Music

    ❑ Playing the Photos / Videos / Music During playing a file, press the button to select the desired menu. u/d/l/r When the option menu is not displayed, press the TOOLS button or ENTERE button. You can also use buttons on the remote control during ∂/∑/∫/π/µ...
  • Page 89 Playback menu Button Operation Photos videos Music ● Previous Next ● Start Slide Show Stop Slide Show Play Pause Mini Player* ● ● ● ● Previous Next Mini Player* ◀ ▶ ● ● Rewind Fast forward * When setting the Background Music Mini Player in Photos, these buttons appear.
  • Page 90 Setting menu ● Photos Button Operation You can set the Slide Show Speed Slide Show Effect Slide Show Settings during the slide show. You can zoom into images in full screen mode. Zoom You can rotate images in full screen mode. Rotate You can set background music when watching a slide show.
  • Page 91 During the slide show, all files in the file list will be displayed in order. → → When you press the (Play) button (or button ∂ Options Slide Show) in the file list, slide show will be started immediately. During the slide show, you can adjust the slide show speed using (REW) or π...
  • Page 92 ● Videos Button Operation Search Titles: You can move the other file directly. Search Time bar: You can search the video using l and r Search button at one minute interval or entering the number directly. N It may not be supported depending on the input source. You can play movie files repeatedly.
  • Page 93 If video time information is unknown, play time and progress bar are not displayed. In this mode, you can enjoy movie clips contained on a Game, but you can not play the Game itself. ● Supported Subtitle / Video Formats For the details, refer to “Specifications”...
  • Page 94 ● Music Button Operation You can play music files repeatedly. Repeat You can play the music randomly. Shuffle You can adjust the sound setting. Sound Mode Only displays the files with supported music file extension. Other file extensions are not displayed, even if they are saved on the same USB device. ◀...
  • Page 95 Setting the Encoding language Set the encoding language if the text is not supported. 1. Press the button to select Options at the top of music main screen and select Encoding. 2. Select the desired encoding language. ◀ ▶...

  • Page 96: Using The Soccer Mode

    ❑ Using the Soccer Mode Soccer Mode ■ O MENUm → → → ENTERE Applications Soccer Mode This mode provides optimized condition for watching sports games. ● (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in.

  • Page 97: Viewing The E-Manual

    ❑ Viewing the e-Manual e-Manual ■ O MENUm → → → ENTERE Support e-Manual You can read the introduction and instructions about the TV features stored in your For the detailed information about e-Manual Screen, refer to “How to view the e-Manual”...

  • Page 98: Using The Self Diagnosis

    ▶ Yes: Select if the test picture does not appear or there is noise or distortion in the test picture. There may be a problem with the TV. Contact Samsung’s Call Center for assistance. No: Select if the test picture displays properly. There may be a problem with your external equipment.
  • Page 99 There may be a problem with the TV. Contact ◀ ▶ Samsung’s Call Center for assistance. No: Select if you can hear sound from the speakers. There may be a problem with your external equipment. Please check your connections. If the...
  • Page 100 ● Signal Information: (digital channels only) The reception quality of over-the-air HD channels is either perfect or the channels are unavailable. Signal Information displays HD channel signal strength so you can adjust your antenna to increase signal strength and receive HD channels. ●...

  • Page 101: Updating The Software

    ❑ Updating the Software Software Update ■ O MENUm → → → ENTERE Support Software Update Software Update menu lets you upgrade your TV’s software to the latest version. ● Update now: Update software by downloading update files. ● Auto update: This option upgrades the TV while it is in Standby Mode.

  • Page 102: Changing The Use Mode

    Upgrading to the Latest Version Check your TV's software version and upgrade it if necessary. The TV will turn off and on automatically after completing the software upgrade. All video and audio settings return to the default settings after a software upgrade.

  • Page 103: Viewing The Contact Samsung

    ❑ Viewing the Contact Samsung Contact Samsung ■ O MENUm → → → ENTERE Support Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.

Table of Contents