Rails; Nitor Pedestal Base - HP LP2275w User Manual

Hide thumbs Also See for LP2275w:

Table of Contents

Using the Accessory Rails

The monitor features accessory rails on the rear that may be used to mount optional devices, such as

the HP speaker bar, to the LCD monitor. Refer to the documentation included with the optional device

for detailed mounting instructions.

Figure 3-11

Figure

Removing the Monitor Pedestal Base

You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm,

or other mounting fixture.

This monitor has a Quick Release mechanism that allows you to easily remove and replace the monitor

panel to the pedestal base.

CAUTION:

power and signal cables are both disconnected. Also disconnect any USB cables that are connected to

the monitor.

Chap

apte ter r 3 3 Se

3-11 Using the A

Using the Accessory Rai

ccessory Rails Feature

Before beginning to disassemble the monitor, be sure the monitor is turned off and the

Disconnect and remove the signal and power cables from the back of the monitor.

Slide the quick release latch (1) on the pedestal base to the side (either right or left).

Sett ttin ing g Up

Up th the e Mo

Moni nito tor r

ls Feature

Table of Contents

Lp2475w