Table of Contents
Advertisement
www.ti.com
7.3 GUI RX Testing
RX testing is used for gathering Wi-Fi statistics in the air within a specified channel in case of external antenna.
While using RF connector for accurate RF tests the packets will be accepted by the RF connected path.
Duration: Statistics gathering time can be specified with a fixed duration, or 0 to make the testing time indefinite,
until the user presses the STOP button. Statistics are gathered automatically whenever the RX testing is
stopped. However, users may choose to gather the statistics any time before RX testing ends by clicking the Get
Statistics button.
Table 7-3
Field
Valid
Addr Mismatch
FCS Error
Mang frame
DataCtrl frame
Figure 7-3
lists the RadioTool GUI in the RX Tab.
SWRU471B – FEBRUARY 2017 – REVISED AUGUST 2020
Submit Document Feedback
lists fields explanations.
Table 7-3. Fields Explanation
Description
Valid packets
Packets with address mismatch
Frame Check Sequence error
Average RSSI in management frames
Average RSSI in Data Control frames
Figure 7-3. RadioTool GUI in RX Tab
Copyright © 2020 Texas Instruments Incorporated
SimpleLink™ Wi-Fi® CC3x20, CC3x3x Radio Tool User Guide
Running the RadioTool GUI
11
Advertisement
Table of Contents
