Agilent Technologies 8648A Operation And Service Manual page 296

Adjustments
Agilent Service Support Software
NOTE This is the last point that you can cancel the installation. if you select Next,
the installation proceeds until the software is completely installed.
8. Select Next to proceed. A status gauge is displayed to show the progress of the
installation.
When another of the installation disks is required, you will be notified to insert the next
in the series of disks. Select the OK button when you have the required disk in place.
9. The Setup Complete screen is displayed when the installation is complete. You may
choose to view the README file as well as the INFO file at this time. (You already read
the INFO file when you started the installation.) Make your selection and select the
Finish button.
10.The MS Windows program must be restarted before you can use the software. Choose
either to restart now, or later.
7-40