Cabinet Stability; About This Guide Ix - Compaq StorageWorks ESL9000 Series Installation Manual

Cabinet Stability

Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
Power Supplies or Systems marked with these symbols
indicate the equipment is supplied by multiple sources of
power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from
the system.
Any product or assembly marked with these symbols indicates that
the component exceeds the recommended weight for one individual
to handle safely.
WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety
requirements and guidelines for manual material handling.
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
I
The leveling jacks are extended to the floor.
I
The full weight of the cabinet rests on the leveling jacks.
I
The stabilizing feet are attached to the cabinet if it is a single cabinet
installation.
I
The cabinets are coupled in multiple cabinet installations.
I
Only one component is extended at a time. A cabinet may become
unstable if more than one component is extended for any reason.

About This Guide ix