Remove The Memory - Lenovo IdeaPad 1 Series Hardware Maintenance Manual

Remove the memory

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board. Then, remove one screw, and the 2242
solid-state drive bracket.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 9. Disconnect the battery pack cable
Step 2. Open the latches and remove the memory.
Figure 10. Remove the memory
32
IdeaPad Series 1 Hardware Maintenance Manual