Advertisement
１．Scope
These specifications apply to QUARTZ CRYSTAL RESONATORS ( hereinafter
referred to as RESONATORS ) to be manufactured by Seiko Instruments Inc.
( hereinafter referred to as SII ) to
２．Designation
RESONATORS are designated"SC-20S" ( 32.768 kHz ).
３．Shape and dimensions
As per the SC-20S drawing shown on page 5 .
４．Electrical characteristics
Specified on page 2 through 3 .
５．Shipment and packaging
5.1 ( 3,000 ) pcs are the standard lot size to which the lot number shall be allotted
5.2 The packaging shall conform to the resonator packaging standards.
６．Outgoing inspection
6.1 When mutually agreed, the outgoing inspection shall be conducted as per
the standard on page 4.
6.2 The outgoing inspection slip is not basically affixed to each packaging.
７．Warranty
In the event that any defective RESONATORS or defective lot is found at
incoming inspection at and that
any defect resulting from failures in process-control at SII after incoming
inspection is found, good RESONATORS shall be supplied to
In the event that any trouble or problems rising directly from RESONATORS
occurs, it will be amicably settled between both parties, provided that
warranty shall be done within the score of replacement of good RESONATORS.
８．Amendment or abolition of the specifications
Amendment or abolition of the specifications shall be made upon mutual consent
between and SII. If any problem arises,
it shall be amicably settled between both parties.
９.Effectiveness of the specifications
These specifications are effective after receipt of returned copies with your
approved sign.
10．Others
This product is completely Pb-free and Halogen-free.
Delivery Specifications
free of charge as a replacement.
1/11
Advertisement
