Model: Motorola Xl Smart Safe - Motorola Bolt Smart Safe User Manual

Installation
We recommend using the Flex Smart Safe expandable wings and wing extender knob to install
your safe securely. Follow the included Secure Installation Instructions to ensure proper
installation of your safe in a suitable location between two fixed walls.

Model: Motorola XL Smart Safe

Your XL Smart Safe comes with two secure installation methods that allow you to ensure your
safe contents' safety. We recommend utilizing both methods for installation.
Use the included shelf bolts to attach your XL Smart Safe to a shelf
-OR-
Use the included wall screws to attach to a wall securely. Do NOT mount to a wall without a shelf
to support the weight of the safe.
Required Tools
The XL Smart Safe provides two installation methods. Mounting the safe directly to the wall
requires the use of a Phillips screwdriver or drill bit. Bolting the XL Smart Safe to a shelf or flat
surface requires the use of a wrench.
Installation
We recommend selecting an installation location that allows you to plug your XL Smart Safe into
an outlet as your primary power source..
1. Prepare your installation location and pre-drill the necessary holes.
2. Open your safe and remove the two felt-covered caps on the floor of the safe.
3. Insert the bolts into the pre-drilled holes of the shelf, then fasten with washers and nuts.
4. Once securely fastened, reinsert the felt covered bolt caps to hide the bolts and protect
valuables stored inside.
5. Optionally, use the included wall screws to secure your safe to the wall.
ITSmart Security, LLC
11