Advertisement
Quick Links
Installation And Testing Guide
Quick Reference Install Guide
If you have not already, visit
1
dealer for access to install testing and configuration tools. Sooner is
better since registrations are processed manually and are not instant.
2
Keep track of the SIM number located on the card included with this
system. It is needed to test / activate the deivce later.
Choose a discreet yet ideal mounting location for the module. This
3
is a cellular device and performance is dependant on cellular signal
strength.
4
Route wiring from the mounting location and make all necessary wiring
connections - SEE "CONNECTING THE DEVICE" ON PAGE 2.
After a few minutes, check the indicator lights to make sure the unit
5
has cellular service. Both the green and orange lights should be on
solid.
Login into your dealer account at
6
vice, configure the installed options, and perform the installation test.
Be sure to have the SIM number available.
7
Complete the installation by reassembling the vehicle's interior.
IMPORTANT:
8
vehicle's owner. For more info, see the dealer portal guide by logging in
to your dealer account at omegacarlink.com.
IM_OMEGA-CARLINK 10/20/11
Be sure to give the activation code and app info to the
Detailed instructions continued on following pages ->
OMEGA-CARLINK
SMARTPHONE INTERFACE
omegacarlink.com
omegacarlink.com
Model:
and register as a Carlink
to activate the de-
Advertisement
Related Manuals for Omega Carlink OMEGA-CARLINK
Summary of Contents for Omega Carlink OMEGA-CARLINK
- Page 1 Model: OMEGA-CARLINK SMARTPHONE INTERFACE Installation And Testing Guide Quick Reference Install Guide If you have not already, visit omegacarlink.com and register as a Carlink dealer for access to install testing and configuration tools. Sooner is better since registrations are processed manually and are not instant.
- Page 2 - DO NOT SECURE THE DEVICE YET Step 3a: Connect the device - DIGITAL (typical install) This device is initially configured to operate as a simple plug-in upgrade to compatible Omega systems. Any Omega system that supports the iDatalink data protocol also supports carlink as a plug-in upgrade. This includes all BLADE compatible systems (be sure the system is updated to the latest firmware).
- Page 4 Step 3b: Connect the device - ANALOG This system can be installed as a stand-alone system or to control ana- log activation inputs on an older host system that does not support the iDatalink protocol for CarLink. To be connected this way, you will need to cut off the GREEN 4-pin data connector.
- Page 6 Step 6: Check the indicator lights Locate the indicator lights on the end of the module. They are next to the main harness. After powering up the device, you will notice the GREEN and ORANGE indicator lights will flash then eventually turn on solid. Solid lights indi- cate proper connectivity and you can proceed to the installation test. GREEN light (power / processing): Off: No power, the device is OFF.
-
Page 7: Useful Information
Useful Information CarLink Login Website: www.OmegaCarLink.com Omega Research & Development, Inc. Corporate Website: www.CarAlarm.com Corporate Phone: 800-554-4053 Tech Support Phone (hardwire/wiring only): 800-921-TECH (8324) Tech Support Web: www.WireSheet.com IM_OMEGA-CARLINK 10/20/11... - Page 8 IM_OMEGA-CARLINK 10/20/11...