IBM ThinkPad 365C 2625 Maintenance Manual page 292

Symptom / Error
110
(Planar parity.)
111
(I/O parity.)
161
(Dead battery.)
163
(Time and Date was not
set.)
173
(Configuration data was
lost.)
174
(Configuration error:
Perform"Checking the
Installed Devices List" on
page 293 before changing
any FRUs.)
184
(POP check sum error.)
190
(Depleted battery pack was
installed when the power
was on.)
191XX
(PM initialization error.)
195
(The configuration read from
the hibernation area does
not match the actual
configuration.)
280
IBM Mobile Systems - ThinkPad HMM Volume 3
FRU / Action in Sequence
1. Go to "Memory
Checkout" on
page 269.
2. DIMM Card
3. The computer is
attached to the
expansion unit.
4. System Board
1. Go to "Memory
Checkout" on
page 269.
2. System Board
1. Go to "Checking the
Backup Battery" on
page 275.
2. Backup Battery
3. System Board
1. Reseat the keyboard
connector on the
system board.
2. Set Time and Date.
3. System Board
1. Reseat the keyboard
connector on the
system board.
2. Select OK in the error
screen; then set the
time and date.
3. Backup Battery
4. System Board
1. Check Device
Configuration.
2. System Board
3. Diskette Drive
Assembly
4. Hard Disk Drive
Assembly
1. Reset the POP
(power-on password)
in Easy-Setup.
1. Go to "Checking the
Battery Pack" on
page 274.
1. System Board
1. Check if the
configuration was
changed.
For example, check if
the DIMM card is
added.