BZBGEAR BG-UHD-VW24 PRODUCT MANUAL TABLE OF CONTENTS Statement Safety Precaution Introduction Features Packing List Specifications Operation Controls and Functions RS232/LAN Control Connection RS232 Control Connection Network Control Connection PC Tool User Guide Signal Setting Tab FineTune: PQ Tab CEC Control Tab...
● This product does not contain parts that can be maintained or repaired by users. Damage caused by dismantling the product without authorization from BZBGEAR is not covered under the warranty policy. ● Installation and use of this product must strictly comply with local electrical safety standards.
PRODUCT MANUAL Introduction The BG-UHD-VW24 is a HDMI 2.0 video wall controller with 2 HDMI inputs, 2 HDMI loop outs, and 4 HDMI scaling outputs for video wall processing. The 5-pin phoenix connector provides balanced L/R audio output. The BG-UHD-VW24 also features PC Tool or RS232 commands to control the product for different wall displays.
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL Operation Controls and Functions Front Panel Name Function Description Power LED The power LED will illuminate when the unit is powered on The LED will illuminate when the corresponding HDMI input port is connected to INPUT LED an active HDMI source device.
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL RS232/LAN Control Connection RS232 Control Connection Connect to the RS232-CTL port of the product to a PC using a USB serial cable as shown in the following figure: Network Control Connection · · Address: 830 National Drive #140, Sacramento, CA 95834, USA Tel: +1(888)499-9906 Email: support@bzbgear.com...
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL PC Tool User Guide The PC Tool control software supports both UART and network control. PC Tool consists of five parts: Matrix Switch, Signal Setting, Fine Tune: PQ, Video Wall and CEC Control. The UI is as follows: Matrix Switch Tab 1.
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL A. Read the EDID information for devices connected to each output and save as a BIN file. B. Open an existing EDID file and write to the HDMI A and B input port as Manual EDID.
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL FineTune: PQ Tab Configure the brightness, contrast, saturation, and sharpness of each output. Note: The recommended settings are the default 50/50/50/50. Please do not change the default settings unless under special circumstances. If problems arise after reconfiguration, click ‘Reset’...
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL Video Wall Tab Configure a group of outputs to function together as a video wall. The Video Wall Setting controls manage how the displays are arranged: 1. Adjust the “Rows” and “Columns” sliders to adjust the displayed screens arrangement.
Page 13
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL Creating a second video wall Repeat steps 2-5 above using a different set out outputs. Please note that changing the “Rows”, “Columns” and “Available” sliders will automatically delete the current video wall configuration once the “Set” button is clicked. The following example shows an unusual video wall configuration for demonstrative purposes.
Page 14
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL Screen Splicing This option connects the selected screens into a video wall configuration. Cancel Splicing Return the Video Wall configuration to normal outputs. Remove a single screen from the unified video wall to display a separate image.
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL Bezel Compensation: The images below demonstrate a video wall setup without bezel compensation and a video wall setup with correctly configured bezel compensation: Layout Save/Load: The Save Scene/Layout and Load Scene/Layout buttons allow video wall configurations to be saved and used at any time.
Copyright All the contents in this manual and its copyright are owned by BZBGEAR. No one is allowed to imitate, copy, or translate this manual without BZBGEAR’s permission. This manual contains no guarantee, standpoint expression or other implies in any form. Product specification and information in this manual is for reference only and subject to change...