Advertisement
FUNCTION DESCRIPTION
1. VOL-/PREV: Press and hold to decrease the volume, press to skip to previous track.
2. VOL+/NEXT: Press and hold to increase the volume, press to skip to next track.
3. Mode: Press to change between modes AUX/OPTICAL/USB/BT.
4. Power: Press and hold to switch ON/OFF the sound bar. Press to play/pause music.
5. AUX IN Port.
6. Optical Port.
7. USB Port.
8. DC IN Port.
Note:
The RC sensor is at the front of the sound bar.
REMOTE CONTROL FUNCTIONS
1. Power: Switch on or to standby
2. Mute/Unmute
3. Press to enter USB Mode when USB is Plugged in.
4. Press to enter AUX Mode
5. Press to enter BT Mode
6. Press to enter OPT Mode
7. Press to Next track on USB/BT Mode; Press and
hold to fast forward on USB Mode
8. Press to Previous Track on USB/BT Mode;
Press and hold to fast rewind on USB Mode
9. Press to Play/Pause on USB/BT Mode. In BT,
press and hold to disconnect current connection
and enter pairing mode. Press to mute/unmute
in AUX or Optical mode.
10. Press for Volume +; Press and hold for fast
Volume increase.
11. Press for Volume -; Press and hold for fast
Volume decrease.
12. EQ button
4
www.PyleUSA.com
OPERATION INSTRUCTION
ON/OFF Switch
1. Connect the DC port of adapter to the sound bar then connect the power cord to
a wall socket
2. Press the "POWER" to switch ON the sound bar, and it will enter BT mode
automatically, with both sound alerts blue LED flashes quickly; press and hold the
"POWER" again to switch OFF.
3. The Soundbar automatically turns OFF after 15 minutes idle.
WIRELESS BT CONNECTION
1. Put the soundbar near the BT device.
2. Switch ON the PSBV110B, an alert sound will appear and blue LED flashes quickly,
which means it is ready for pairing.
3. Turn ON the BT function of the mobile device, search for "PYLE" and connect to it
once found. If a Passkey is requested, enter "0000".
4. An alert will appear when connected, and the blue LED light will be on.
5. The soundbar will reconnect to the last paired device when switched on,
If it doesn't connect, the soundbar will enter pairing mode automatically.
OPTICAL FUNCTION
1. Plug the optical cable into the optical port and the other side to TV or other device
with optical/digital port.
2. Short press "MODE" into optical mode, LED lights (white) will light indicating
"optical", music will start playing.
USB FUNCTION
1. Press "MODE" to USB mode, red LED lights on.
2. Press "POWER" on Soundbar or "PLAY/PAUSE" on remote control to play/pause.
3. Press VOL-/PREV or VOL+/PREV to go to previous/next song.
5
www.PyleUSA.com
Advertisement
