Table of Contents
Advertisement
L1 Substates
This item allows you to select the PCI Express L1 Substate settings.
Configuration options: [Disabled] [L1.1] [L1.2] [L1.1 & L1.2]
PCIe Speed
Configures the speed of PCIEX16_2 slot. Configuration options: [Auto]
[Gen1] [Gen2] [Gen3]
Detect Timeout
This item allows you to set the number of milliseconds to wait before
assuming there is no device and potentially disabling the port. Use <+> and
<-> to adjust the value.
Hot Plug
These items allow you to enable/disable PCIEX16_2 slot Hot Plug support.
Configuration options: [Disabled] [Enabled]
Detect Non-Compliance Device
These items allow you to enable/disable detection of non-compliant PCI
express devices. Configuration options: [Disabled] [Enable]
3.3.6
Super IO Configuration
NCT6126D Super IO Configuration
Serial Port 1 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Configuration options:
[Enabled] [Disabled]
The following items appear only when you set the previous item to [Enabled].
COM1 Control
Allows you to select the COM1 mode. Configuration options: [RS232]
[RS422] [RS485]
Serial Port 2/3/4/5/6 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Configuration options:
[Disabled] [Enabled]
Chapter 3: BIOS setup
3-5
Advertisement
Table of Contents
