Table of Contents
Advertisement
7 Lay the computer down on a flat surface, covered with
a soft cloth to protect the screen from scratches or
other damage. Make sure the stand extends beyond
the edge of the flat surface.
8 Remove the screw cover from the drive door by lifting it
up and away from the computer.
9 Remove the screw at the top of the drive door using a
flathead or Torx screwdriver.
647642-001 — Removing and Replacing a CD/DVD Drive
10 Slide the drive door toward the center of the computer
until it stops (approximately 5 cm or 1/5 inch).
1 1 Lift (1) and remove (2) the drive door from the back of
the computer.
12 Remove the two screws that secure the side panel to
the computer.
3
Advertisement
Table of Contents
