Before Applying Power; Internet Connection; How Do I Reset Entré; Safety Precautions - Kenwood Sovereign Entre Install Manual

Connecting and Setting Up Your New Kenwood Sovereign Entré

Before Applying Power

Read this section carefully to ensure safe operation.
Kenwood Sovereign Entré is designed for operation on AC 120 V only. Entré
must be connected to a 120V AC outlet that supplys constant voltage. Do not

Safety Precautions

Read this section carefully to ensure safe operation.
Prevent electric shock:
•Do not expose your Entré to rain or moisture.
•Do not remove the cover (or back). There are no user
serviceable parts inside. If your Entré requires repair, take it to
an authorized service outlet.

Internet Connection

Many of Entré's capabilities, including downloading CD information,
connecting to Internet radio stations, or automatic software updates, require a
specific type of Internet connection.
You must have a third-party Internet service provider (ISP) to access those
features.
How Do I Reset Entré?
If Entré fails to respond to front panel or remote commands or if it responds
erroneously, use the following procedure to reset it:
iv
use an outlet controlled by a switch, or the switched power outlet on your
Entré or other audio component.
The following icons indicate the presence of uninsulated dangerous voltage
that may be of sufficient magnitude to cause electric shock:
Because free ISPs, AOL, and CompuServe do not use
standard methods of Internet connectivity, and do not open
their networks to outside users, you can not use these ISPs
with Entré.
To obtain an ISP via OpenGlobe, begin the Quick Start Setup
process (see "How Do I Power-Up Entré for the Very First
Time?" on page 19) and call the toll-free number given to
you during the proccess.
• Hold the button down until the Standby Indicator begins to flash
POWER
on and off. Then release the
POWER
• When the Standby Indicator stops flashing and is lit constantly, push the
button to turn Entré on.
POWER
How to Connect and Set Up Your Entré Entertainment Hub
button.