Installing the optical-drive assembly
Tighten the screws to secure the bracket to the optical drive.
1.
Insert the optical-drive assembly into the drive slot, until it snaps in.
2.
Install the:
3.
a.
back cover
b.
stand
Follow the procedure in
4.
Removing the system-board shield
Follow the procedure in
1.
Remove the:
2.
a.
stand
b.
back cover
To remove the system board shield:
3.
a. Press the securing tab to release the system-board shield from the slots on the computer [1].
b. Slide the system-board shield away from the computer [2].
c. Lift the system-board shield from the computer [3].
16
After Working Inside Your
Before Working Inside Your
Computer.
Computer.