D-Link DCS-5230L Install Manual page 7

Wireless n pan/tilt network camera

Hide thumbs Also See for DCS-5230L:

Table of Contents

Available languages

5. I do not have a router. How do I install my DCS-5230L?

• Connect the camera directly to the computer's Ethernet port.

• Assign your computer a static IP address within the same range as

the camera, such as 192.168.0.113.

• Access and set up your camera via the default IP address of

http://192.168.0.20.

• For more information, please refer to the User Manual.

Note: If you do not have a router, you will not be able to remotely access

your camera.

Table of Contents