Clarke Alto SCRUBTEC 743 S Operator's Manual page 29

PROBLEM
The cleaning is not even.
The machine does not run.
CLARKE TECHNOLOGY Operator's Manual
CAUSE
The scrub brush or pad is worn.
There is damage to the brush assembly,
caster or the solution valve.
The brush motor is not running
The solution level is low.
The machine loses power.
Key or switch is off.
Batteries are disconnected.
Battery terminals are dirty.
Batteries are discharged
-SCRUBTEC 743 and 751
ACTION
Replace the scrub brush or pad.
Have an authorized service person make
the needed repairs.
Check for tripped breaker. Reset. Check
for loose connections.
Fill the solution tank.
NOTE: If the problem continues consult an
authorized service person.
Reset the circuit breaker.
Turn key or switch on.
Check the battery connections.
Check battery meter and recharge
NOTE: If the problem continues consult an
authorized service person.
Page -29-