Page 1
All information, specifications and product designs may change due to design improvements or updates and are subject to change without notice. Jackson Tool does not assume any liability for damages resulting from misuse or incorrect application of its products.
See page 5 for threader CAUTION mounting positions. MODEL DESCRIPTIONS Will fit RIGID ® Model No. Description Model # 224W Rolling Stand with tray 535 – 2001 and newer 1224 235W Rolling Stand with storage box 535 – 2001 and newer 1224 *RIGID is a registerered trademark of Emerson Electric, Inc.
ASSEMBLY INSTRUCTIONS Figure 1 1. Attach front and rear cross members (18,20) to side frames (21,22) with 3/8" - 16 × 1" hex head cap screws and 3/8" - 16 hex nuts (6,24) as shown in Figure 1. Be sure crossmembers are assembled as shown in Figure1.
THREADER MOUNTING POSITIONS 535-A/535 1224 (Front) Manual-2001 and newer 535-A/535 (Front) Manual-2001 and newer (Rear) 1224 (Rear) Figure 2 NOTE: Front of 535/1224 is oil reservoir end of unit.