Remington AS7100 Manual page 4

ENGLISH
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. 400W power handle
2. Speed/heat selector switch (N, O)
3. Brush rotation lock button
4. 19 mm brush
5. Attachment retaining cap
INSTRUCTIONS FOR USE
Prepare the hair for styling
• Wash and condition the hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• For best results, dry your hair as normal until it is about 70-80% dry.
• Divide the hair into sections, style the lower layers first.
To fit/remove attachments
Fit the attachment before you turn on the appliance.
CAUTION: Attachments can become hot during use, let them cool before removing.
1. Unscrew the attachment retaining cap (fig. A).
2. Slide the attachment off (fig. B).
3. Slide the new attachment on (fig. C).
4. Refit the attachment retaining cap and tighten firmly (fig. D).
Speed and temperature settings
1. Plug your styler in to the mains power supply.
2. Turn your air styler on and select the appropriate setting for your hair by sliding the
speed/heat selector switch.
3. Your air styler has two settings:
• High heat/speed O: Thick and difficult to style hair.
• Low heat/speed N: Thin/fine, damaged or bleached hair.
4
6. Inlet grille
7. 25 mm brush
8. Hang up loop
9. Swivel cord