Installing The Escutcheon - Kenwood DNX-710 Installation Manual

Installing the Escutcheon

For General Motors
1. Refer to the section <Removing the Hard Rubber
Frame> and then remove the hard rubber frame.
2. Cut out accessory 7 to meet the shape of the
opening of the center console.
3. Attach accessory 7 to the unit.
For Toyota/Scion
1. Refer to the section <Removing the
Hard Rubber Frame> and then remove
the hard rubber frame.
2. Cut out accessory 7 as illustrated.
3. Fold double-sided adhesive (accessory
8) along the slit and attach it to
accessory 7 cut-out against the
center rib as illustrated. Use 2 pieces
of accessory 8 for 1 accessory 7 cut-
out.
4. Attach accessory 7 cut-out to the unit.
|
8
DNX7100
Accessory 8
Cut out to meet the shape of
the opening in the vehicle.
Accessory 7
Cutting line
Accessory 7