Sharp XV-Z90E Service Manual page 19

No. Adjustment Items
20 Confirmation of
thermistor opera-
tion
21 Automatic sync
operation
22 Factory settings
Adjustment Conditions
1. Heat the thermistor by dryer.
1. Receive the phase checking pattern
signal.
Adjustment Procedures
1. Confirm that the temperature is dis-
played.
1. Confirm that Clock, Phase, H-POS
and V-POS can be automatically
adjusted in the VGA/S-VGA/XGA
mode.
1. Make the following settings.
Process
adjustment
SS3
19
XV-Z90E
XV-Z91E
Remote controller
settings
"Factory Setting 3"