Table of Contents
Advertisement
2-1-2. USING THE REMOTE COMMANDER TO VIEW OR
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the Service
Menu items and adjust the Data Values.
DISPLAY
Channel
4. To change the Category,
press
to move to the Next Category or
2
press
to go back to the Previous Category.
5
Note: Pressing
2
the Service Menu displayed.
5. To change the adjustment item,
press
1
to move to the Next Item or
4
to go back to the Previous Item.
6. To change the Data Value,
press
3
to increase the Data Value or
6
to decrease the Data Value.
7.
Press MUTING then press
8. To exit service mode, press HOME or turn the TV power off.
KDL-40NX715/46NX715
5
+
Volume
or
only changes the Categories within
5
to WRITE (Save) the changes.
0
SERVICE ADJUSTMENTS
2-2. ADJUSTMENTS AFTER REPLACING THE BUHT BOARD
OR LCD PANEL ASSEMBLY
The following procedures must be completed after replacing the BUHT
Board or the LCD Panel Assembly
þ
POWER
þ
þ
þ
þ
þ
þ
2-2-1. UPDATING THE SOFTWARE
After replacing the BUHT Board or the LCD Panel Assembly, you must
update the software to the latest version.
Before you begin
þ
Instructions for updating the software are included with the software
package. After completing the software update, proceed to
"Selecting the Model".
Update the TV to the latest software version
Select the Model
Select the Destination
Reset the Data Value in the Panel Engine Micro
Verify the Emitter Output Level
Verify model and panel information are correct
Reconnect all cables
Disconnect all cables (RF, External input, Ethernet, etc.)
from the TV
22
Advertisement
Table of Contents
