Accessories - Hatco FLAV-R-SAVOR FSHC-6W Series Installation And Operating Manual

STACKING KIT
A special stacking bracket is available for stacking
one FSHC-7 unit on top of another FSHC-7 unit or
one FSHC-6W unit on top of another FSHC-6W unit.
The stacking hardware secures the top unit to the
bottom unit.
1. Carefully lay top unit upside down.
NOTE: Place a piece of cardboard between the
cabinet and floor to prevent marring the cabinet
finish.
2. Attach stacking bracket to underside of top unit
using hardware supplied. (See Figure 9.)
3. Carefully place the top unit (at least two people
required) onto the bottom unit.
4. Secure two units by installing two screws on the
rear of the unit through the stacking bracket and
into the holes on the back of the bottom unit.
(See Figure 9.)
STAINLESS STEEL DOOR
(FSHC-6W Series Only)
The optional heavy duty stainless steel door is not
available for retrofit. (See Figure 10.)
All manuals and user guides at all-guides.com
Figure 9. Stacking Kit
Figure 10. Stainless Steel Door
13

ACCESSORIES

Form No. FSHC67M-0808