SN55, SN55S, SN55V, SN75, SN75S, SN75V User Manual
5.2 Home page
For a complete overview of the controller, see the Sullair
Touch Screen (STS) Controller User Manual (P/N
02250241-178 R00) for more information.
The Analog/Digital Panel screen is the default screen
for the home page. This screen is divided into two main
sections:
• The status area at the top shows the load and
run times, starts and cycles, and message
related to the current status (state and mode).
1. Main menu button (red square)
Figure 5-2: Home page—Analog/Digital Panel screen (default)
Subject to EAR, ECCN EAR99 and related export control restrictions.
• The gauge area below shows discharge tem-
perature, discharge pressure, and sump pres-
sure as analog gauges.
You can change the units of measure for pressure and
temperature on the User Preferences page (see Section
5.4 on page 66).
You can access the User Preferences page by pressing
the main menu button in the lower left corner of the
screen, then selecting System Information, and then
selecting User Preferences. (See Section 5.5: Menu
hierarchy on page 67 for the complete menu structure.)
02250247-571 R04
5: Controller
64