Table of Contents
Advertisement
1
Press the
button repeatedly on the
unit or on the remote control to select
the Optical,
Audio in,
ARC mode.
2
Operate your audio device directly
for playback features.
3
Press the VOL +/– buttons to adjust
the volume to your desired level.
» When selecting a different audio
format, the soundbar will display
the following as follows:
Audio (abbreviation)
LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital
Dolby TrueHD
Dolby Digital Plus
Dolby Atmos -
Dolby TrueHD
Dolby Atmos -
Dolby Digital Plus
Note
•
The unit may not be able to decode all digital
audio formats from the input source. In this case,
the unit will mute. This is NOT a defect. Ensure
that the audio setting of the input source (e.g.
TV, game console, DVD player, etc.) is set to PCM
or Dolby Digital (Refer to the user manual of the
input source device for its audio setting details)
with HDMI in / HDMI ARC / Optical input.
Play audio through USB
Enjoy audio on a USB storage device,
such as an MP3 player and USB flash
memory, etc.
1
Insert the USB device.
24 EN
HDMI in, HDMI
Display
PCM
PCM
PCM
Dolby AUDIO
Dolby AUDIO
Dolby AUDIO
Dolby Atmos
Dolby Atmos
2
Press the
button repeatedly on
the unit or on the remote control to
select the USB mode.
3
During playback:
Button Action
Start, pause or resume play.
/
Skip to the previous or next track.
Tips
•
The unit may not be compatible with certain
types of USB storage devices.
•
If you use a USB extension cable, USB hub,
or USB multifunctional card reader, the USB
storage device may not be recognized.
•
Do not remove the USB storage device during
file reading.
•
The unit can support USB devices with up to 32
GB of memory.
•
This unit can play MP3 / WAV / FLAC.
•
Support a USB port: 5V
Factory reset
Reset device to default setting.
•
Turn on the soundbar, press and hold
the +/- buttons at the same time for
8 seconds.
» Display shows "RESET" for 5
seconds.
» While system reboots, display
shows "REBOOT".
500mA.
Advertisement
Table of Contents
