1-3. Charging with the plug-in hybrid system
NOTICE
Do not use the plug-cord for any use other than charging this vehicle. Doing so may
cause the plug-cord to be damaged.
The plug-cord can be replaced using the following procedure.
1
Prepare the AC charging cable and the replacement plug-cord.
2
Pull out the release key.
Make sure that the pulled out release key is not lost.
3
Remove the plug-cord connector cap.
4
Insert the release key into the release slot of the CCID (Charging Circuit
Interrupting Device).
Insert the release key in the direction shown in the illustration.
68