Clarion DAH923 Owner's Manual page 5

TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement
broadcast is received as top priority regardless
of the function mode. Traffic programme (TP)
automatic tuning is also possible.
∗ This function can only be used when "TP" is lit in
the display. When "TP" is lit, this means that the
DAB or RDS broadcast station being received has
traffic announcement programmes.
∗ For details on "TA", refer to the section "RDS
operation" of each owner's manual.
G Setting TA standby mode
G Cancelling TA standby mode
G Searching for a TP station
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• "TP" may be lit in the display when a TP broadcast
is transmitted from an RDS station. In this case,
press the [TA] button to perform TP seek tuning.
Press the [TA] button again to return to the
previous mode.
INFO (Announcement)
In INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
G Setting INFO standby mode
If you press and hold the [TA] button for 1 second
or longer, "INFO" lights in the display and the
main unit is set into INFO standby mode until the
selected announcement is broadcast. When the
selected announcement broadcast starts, the
announcement item appears in the display. If you
press and hold the [TA] button for 1 second or
longer while the selected announcement
broadcast is being received, the selected
announcement broadcast reception is cancelled
and the main unit goes into INFO standby mode.
Digital Radio / DAB Operations
G Cancelling INFO standby mode
To cancel INFO standby mode, press and hold
the [TA] button for 1 second or longer.
G Information select
This is a function for selecting INFORMATION
ON or OFF in Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH Contents
Travel Transport flash
Warning Warning / Service
News News flash
Weather Area weather flash
Event Event announcement
Special Special event
1. Perform the following operation depending on
the connected model.
Press and hold the [ADJ/TITLE] button for 1
second or longer.
2. Press the [ ] or [
"INFO SEL", then push the [
enter "INFO SEL" mode.
3. Press the [ ] or [
information item. You can select any of 6
items:
4. Perform the following operation depending on
the connected model.
• DXZ928R/DXZ828R/DXZ728R
Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the information item for ON
or OFF.
• ADZ628R
Turn the [PRESET] knob clockwise or coun-
terclockwise to set the information item for ON
or OFF.
5. Press the [ADJ/TITLE] button to return to the
previous display.
] button to select
] button to
] button to select an
11
DAH923