Summary of Contents for Radial Engineering REAMP X-AMP 500 Series
Page 1
® True to the Music ™ X-AMP 500 Series Module User Guide ® True to the Music www.radialeng.com Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam British Columbia, Canada, V3C 5M5 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.com...
® ™ Radial X-AMP 500 User Guide Table of Contents ............Page Feature Set ..............1 Introduction to Reamping ..........2 Getting Started ............... 3 Reamping with the Workhorse ........4 Specifi cations ..............5 Block Diagram ..............5 Warranty ............Back cover Congratulations and thank you for purchasing the Radial X-Amp 500 Reamp®...
If you are not sure, consult a technician. Only use guitar amps that have been properly tested for safe use in your country. Radial Engineering Ltd. X-AMP 500 Module...
Radial X-Amp. From there, you can split the signal off to two amplifi ers and mic each one independently. Add another mic in the room or even add guitar effects as needed. Radial Engineering Ltd. X-AMP 500 Module...
1 on the X-Amp to no more than 12 o’clock. You should be hearing plenty of volume. If not, check your amp by connecting your guitar and testing as it may not be set up correctly. You should be good to go. Radial Engineering Ltd. X-AMP 500 Module...
fi nd that in almost all cases, you will end up with a quieter setup. OMNIPORT INPUT RECORDER GUITAR X-AMP GTR AMP GTR AMP Radial Engineering Ltd. X-AMP 500 Module...
CONNECTOR WIRING XLR Connector TS ¼” Phone Connector TRS ¼” Phone Connector GROUND HOT (+) COLD (-) HOT (+) HOT (+) GROUND GROUND COLD (-) X-AMP BLOCK DIAGRAM * Subject to change without notice. Radial Engineering Ltd. X-AMP 500 Module...
Page 8
THREE YEAR TRANSFERABLE LIMITED WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding fi nish and wear and tear on components under normal use) for a period of three (3) years from the original date of purchase.