Troubleshooting - Philips HU2510 User Manual

1 2
1
Take out the humidification filter and the filter support from the water tank.
2
Remove the humidification filter from the filter support. Discard the used filter.
3
Remove the packaging material from the new humidification filter.
4
Assemble the new humidification filter around the filter support.
5
Put the filter and the filter support back into the water tank.
6
Put the upper unit back onto the water tank.

7 Troubleshooting

This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information below,
contact the Consumer Care Center in your country.
Problem
The humidifier does
not work.
There is no air
humidification.
The water tank leaks.
EN
10
3
Possible solution
Make sure that there is power supply to the humidifier.
•
Make sure that the water tank is filled with water and
•
the upper unit is placed properly onto the water tank.
Make sure that the water tank is filled with water and
•
the upper unit is placed properly onto the water tank.
Make sure that the humidifier is not overfilled with
•
water.
Make sure that the humidifier is well assembled/
•
connected every time after you clean it or after you
remove the upper unit and/or water tank for refilling.
Make sure that the water tank is properly placed. If the
•
problem persists, contact the Consumer Care Center in
your country.
4 5 6