8. Specifications
Note:
The technical data and the design of the equipment may change
without prior notice for the sake of technical improvements.
APX Amplifiers
Parameter
Maximum power output
Continuous rated power
Typical power in bridged mode
Typical power in 2-Ohm load
THD (1KHz, 10W, 40 Ohms)
IM distortion
S/N (A-weighted)
Floor noise
Channel separation
Frequency response
Line level input sensitivity
Speaker level input sensitivity
Input impedance
Allowable battery voltage
Size
These specifications are Amplifier Power Standard CEA-2006 Compliant.
24
APX-DPXOwnersManual.pmd
APX4360
160W x 4
90W x 4
300W x 2
160W x 4
≤ 0.025%
≤ 0.08%
≥ 92dB
≤ 2mV
≥ 70dB
10Hz to 50kHz
200mV to 8 Volts
600mV to 20 Volts
33K Ohms
10.5 to 16.5 Volts
16"x12"x2 7/8"
24
APX2180
160W x 2
90W x 2
300W x 1
150W x 2
≤ 0.025%
≤ 0.08%
≥ 93dB
≤ 2mV
≥ 70dB
10Hz to 50kHz
200mV to 8 Volts
600mV to 20 Volts
33K Ohms
10.8 to 16.5 Volts
12"x12"x2 7/8"
APX/DPX Amplifiers
2006-03-14, 21:47