Sony 6L Installation Information page 9

9
Detach the Table-Top Stand from the TV.
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity, do not power on the TV with the LCD
panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the
rear of the TV.
10
Install the TV on the wall. Confirm the Pulleys
the Wall-Mount Bracket and .
WM2
are firmly latched into
WM1
GB
9 (GB)