Epson EasyMP EMP-7850 Setup Manual page 43

Connecting in Access Point Mode or Wired LAN Connection Mode
3
Press the [EasyMP] button on the remote control. EasyMP will be
displayed on the screen. EasyMP starts and the following screen is
displayed.
Tip :
If the LAN card is not inserted in the card slot on the projector, the following screen is
displayed. Insert the LAN card in the card slot on the projector to display the screen for
Step 3.
4 Ensure that the "Config" button at the lower right of the screen is
selected, and press the [Enter] button on the remote control.
When a wireless LAN card is set, the Network advanced settings screen is
displayed. Proceed to Step 5.
When a wired LAN card is set, the wired LAN connection mode advanced
settings screen is displayed. Proceed to Step 7.
42
ESSID ad hoc mode screenshot